Concrete screw UltraCut FBS II CP US

Opis proizvoda

Advantages

The innovative surface coating ensures additional protection against corrosion compared to the galvanized concrete screw FBS II (proved also through salt spray test over 2.000h).
The special saw tooth geometry enables fast cutting into the concrete.
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
Cleaning the drilled hole is not necessary in case of vertical installation (in ceilings and floors) and when using hollow drills. The hole must be drilled 3x the drill hole diameter deeper for holes drilled in floors.
Approval-compliant adjustment allows the concrete screw to be unscrewed twice and the fixture to be underlaid or adjusted.
Three approved embedment depths allow the screws to be used in a wide range of applications, ensuring excellent flexibility.
The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.

Dostupne verzije proizvoda

19 pronađeno verzija proizvoda

Verzija

ETA-approval

DIBt-approval

Drill diameter

d₀

Min. drill hole depth for through fixings

h₂

Legenda = Dopuštenje dostupno — = Dopuštenje nije dostupno

Pregledano 18 od 19 verzija

Primjena i dozvola

Applications

Building materials

Approved for:

Also suitable for:

* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Dozvola/dopuštenje

Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

Functionality

The UltraCut FBS II CP US is suitable for push-through installation.
Cleaning the drilled hole is not necessary for installation in ceilings and floors, and when using hollow drills. For drill holes in floors, you must drill 3x deeper than the drill diameter.
A tangential impact wrench with a suitable nut is recommended for installation (recommended: fischer FSS 18V).
If the screw head is in contact with the fixture, the correct installation of the screw is ensured (visual setting check).

Dokumenti za preuzimanje

Dodatni dokumenti

Odobrenja

Naslov	Tip	Kreirano	Vrijedi do
ETA Certification Document (PDF, 4 MB) European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete	ETA-15/0352	5.10.2020.
ETA Certification Document (PDF, 4 MB) European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry	ETA-20/0134	14.7.2022.
DOP - Declaration of Performance (PDF, 3 MB) Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)	DoP No. 0185	27.11.2020.
DOP - Declaration of Performance (PDF, 5 MB) Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)	DoP No. 0227	19.10.2020.
DOP - Declaration of Performance (PDF, 4 MB) Declaration of Performance for fischer concrete screw UltraCut FBS II (screw anchor for use in masonry)	DoP No. 0311	28.7.2022.
DIBt, National German Certification (PDF, 655 KB) DIBt Approval - fischer concrete screw ULTRACUT FBS II for the temporary fastening of building site equipment	Z-21.8-2049	14.7.2021.	14.7.2026.

ETA-approval
DIBt-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	65 [mm]
Screw dimension d_s x l_s	10.0 x 55 [mm]
Nominal embedment depth / thickness of fixture h_nom1 / t_fix	50 / 5 [mm]
Nominal embedment depth / thickness of fixture h_nom2 / t_fix	— [mm]
Nominal embedment depth / thickness of fixture h_nom3 / t_fix	— [mm]
Drive	TX40 / SW 13
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962403183

ETA-approval
DIBt-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	80 [mm]
Screw dimension d_s x l_s	10.0 x 70 [mm]
Nominal embedment depth / thickness of fixture h_nom1 / t_fix	50 / 20 [mm]
Nominal embedment depth / thickness of fixture h_nom2 / t_fix	— [mm]
Nominal embedment depth / thickness of fixture h_nom3 / t_fix	65 / 5 [mm]
Drive	TX40 / SW 13
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962403190

ETA-approval
DIBt-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	90 [mm]
Screw dimension d_s x l_s	10.0 x 80 [mm]
Nominal embedment depth / thickness of fixture h_nom1 / t_fix	50 / 30 [mm]
Nominal embedment depth / thickness of fixture h_nom2 / t_fix	— [mm]
Nominal embedment depth / thickness of fixture h_nom3 / t_fix	65 / 65 [mm]
Drive	TX40 / SW 13
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962403206

ETA-approval
DIBt-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	100 [mm]
Screw dimension d_s x l_s	10.0 x 90 [mm]
Nominal embedment depth / thickness of fixture h_nom1 / t_fix	50 / 40 [mm]
Nominal embedment depth / thickness of fixture h_nom2 / t_fix	— [mm]
Nominal embedment depth / thickness of fixture h_nom3 / t_fix	65 / 55 [mm]
Drive	TX40 / SW 13
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962403213

ETA-approval
DIBt-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	110 [mm]
Screw dimension d_s x l_s	10.0 x 100 [mm]
Nominal embedment depth / thickness of fixture h_nom1 / t_fix	50 / 50 [mm]
Nominal embedment depth / thickness of fixture h_nom2 / t_fix	- [mm]
Nominal embedment depth / thickness of fixture h_nom3 / t_fix	65 / 35 [mm]
Drive	TX40 / SW 13
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962403220

The high-performance concrete screw for absolute installation ease with special coating