Heavy-duty internal threaded anchor with triple expansion sleeve geometry for low edge clearances

Heavy-duty anchor TA M

Name: Heavy-duty anchor TA M
Brand: fischer

The fischer heavy-duty anchor TA M is an internal threaded anchor made from zinc-plated steel for pre-positioned installation. The heavy-duty anchor is ideal for anchoring fall protection devices, systems, and machines in non-cracked concrete. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances. The plastic cap protects the thread from soiling. This keeps the thread smooth.

Varijante proizvoda

Download of image data

Varijante proizvoda

Odobrenja / Izveštaji o ispitivanju

7 Varijanta(e) proizvoda

Drill diameter

Packaging

Amount

GTIN (EAN-Code)

Legenda = Dostupna dozvola— = Dozvola nije dostupna

Pregledano 7 od 7 varijanti

Advantages

The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The red plastic cap protects against soiling and thus ensures free-running of the thread.

ETA Certification Document

pdf, ETA-04/0003

European Technical Assessment for fischer Heavy-duty anchor TA M, TA M S, TA M T - Mechanical fasteners for use in concrete

Napravljeno 12. 06. 2018.

DOP - Declaration of Performance

pdf, DoP No. 0263

Declaration of Performance for fischer Heavy-duty anchor TA M, TA M S, TA M T (Mechanical anchor for use in concrete)

Napravljeno 12. 01. 2021.

Load Table

pdf,

Heavy-duty anchor TA M - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Komponente sistema

Hammer drill bit Quattric II S / Quattric II
92 varijanti

ETA-approval
Drill diameter ( d₀ )	10 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209902455

ETA-approval
Drill diameter ( d₀ )	12 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209902462

ETA-approval
Drill diameter ( d₀ )	15 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209902479

ETA-approval
Drill diameter ( d₀ )	18 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209902486

Heavy-duty anchor TA M

Varijante proizvoda

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Dokumenti za preuzimanje