Br.art. 530674

fischer Nail anchor FNA II 6 x 30/30 R RB stainless steel (50pcs.)

Top Features

Easy removal of fire protection plates without damage These can be reused.
Secure fixing, even when exposed to vibration, wind, and pushing/pulling effects.
Low anchorage depth saves time and costs.
Simple assembly with hammer or compressed air setting device.
Test certificates from RTW and ZWS.

The removable anchoring solution for demanding fixings.

Advantages

The special active principle allows for a simple hammerset installation and therefore a short processing time.
The extremely short anchor depth prevents reinforcement hits and creates the conditions for a trouble-free installation.
The optimised expansion clip ensures a good hold when the anchor is placed into the drill hole and prevents it from falling out during overhead installations.
The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.

The fischer nail anchor FNA II RB is a fastening element made of stainless steel for fastening fire protection boards and for multiple fixing of other non-load-bearing systems. The nail anchor is set in the time-saving through-type installation. After creating the drill hole, the nail anchor is driven in with a few taps of the hammer, or is set using a compressed air setting device. The large, pre-assembled washer increases the pulling forces considerably and prevents damaging the board during removal. The nail head is taken off with special pliers for removal.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Approved for:

Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications

Also suitable for:

Solid sand-lime brick
Natural stone with dense structure
Prestressed hollow-core concrete slabs

Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.

Odobrenja

ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1

Functionality

The FNA II with nail head is suitable for push-through installation.
The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the hole wall.
Available setting tools:
FNA S-SBO for attachment to drill
FNA S-SDS for series installation with a hammer drill
FNA S-H for the manual installation of mounting rails

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 4

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

Napravljeno 02. 03. 2021.

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

Napravljeno 16. 03. 2021.

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

Napravljeno 05. 10. 2021.

Load Table

pdf,

Nail anchor FNA II RB - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60

Anchor length ( l )	68 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	66 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	36 mm
Effect. anchorage depth ( h_ef )	30 mm
Max. fixture thickness ( t _fix )	30 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4048962204612

fischer Nail anchor FNA II 6 x 30/30 R RB stainless steel (50pcs.)

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Tehnički Podaci

Dokumenti za preuzimanje