Br.art. 44113

fischer Nail anchor FNA II 6 x 30 M6/5 C highly corrosion-resistant steel

Top Features

Hammerset installation saves time.
No reinforcement hits due to low anchorage depth This saves time and costs during series installation.
Expansion clip provides a firm hold.
ETA approval for multiple fixings.
Made of highly corrosion-resistant steel for highly-corrosive atmospheres.

The installation-friendly Hammerset anchor made of highly corrosion-resistant steel with thread and flange nut for multiple fixings.

Advantages

Easy removal of fire protection board without damage.
Reusability of fire protection board.
Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences.
Low anchoring depth (30 mm).
Convenient installation without torque-controlled setting tool.
Approved system that has proven itself one million times over.

The fischer nail anchor FNA II with thread and flange nut is made of highly corrosion-resistant steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing rail joiners for conduits and pipes in highly corrosive atmospheres.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems

Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.

Odobrenja

ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

Napravljeno 02. 03. 2021.

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

Napravljeno 16. 03. 2021.

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

Napravljeno 05. 10. 2021.

Load Table

pdf,

Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

ETA-approval
Anchor length ( l )	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209441138

fischer Nail anchor FNA II 6 x 30 M6/5 C highly corrosion-resistant steel

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Tehnički Podaci

Dokumenti za preuzimanje