The economic fixing solution with ETA approval for non-cracked concrete.

Bolt anchor FWA Plus

The fischer FWA Plus bolt anchor is the economic fixing solution for medium and low loads in non-cracked concrete. The bolt anchor is available in sizes M8 - M16, in galvanised steel and has an ETA approval.

Produktvarianten

Download of image data

Produktvarianten

Zulassungen / Prüfberichte

16 Produktvarianten

Drill diameter

Max. fixture thickness

Min. drill hole depth for through fixings

Min. effect. anchorage depth

Thread

Anchor length

Legende = Zulassung vorhanden— = Zulassung nicht vorhanden

Gesehen 16 von 16 Variante(n)

Advantages

The ETA Option 7 for non-cracked concrete ensures a high quality standard.
With the standard anchoring depth, the FWA Plus achieves the highest load-bearing capacity. This means fewer fixing points and smaller anchoring plates.
The impact pin protects the thread from damage and thus ensures time-saving installation and removal of the attachment.
The comprehensive M8 - M16 range in galvanised steel enables a wide range of indoor fastenings.
Quick and easy installation is made possible with the help of the FA-ST II setting tool.

Functionality

The FWA Plus is suitable for pre-positioned and push-through installation.
When the nut is tightened, the conical bolt is pulled into the expansion clip and braces it against the wall of the drill hole.
When the specified torque is reached, the anchor is set in accordance with the approval.
For series installation, we recommend using the FABS or FA-ST II bolt anchor setting tools.

Mounting Strip 1 Picture

1 / 5

ETA-approval
Drill diameter ( d₀ )	8 mm
Max. fixture thickness ( t_fix )	10 mm
Min. drill hole depth for through fixings ( h₂ )	75 mm
Min. effect. anchorage depth ( h_ef )	48 mm
Thread ( ø x length )	M8 x 41 mm
Anchor length ( l )	76 mm
Washer (outer diameter x thickness)	16 x 1.6 mm
Width across nut	13 mm
Installation torque ( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528619

ETA-approval
Drill diameter ( d₀ )	8 mm
Max. fixture thickness ( t_fix )	30 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Min. effect. anchorage depth ( h_ef )	48 mm
Thread ( ø x length )	M8 x 59 mm
Anchor length ( l )	96 mm
Washer (outer diameter x thickness)	16 x 1.6 mm
Width across nut	13 mm
Installation torque ( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528626

ETA-approval
Drill diameter ( d₀ )	8 mm
Max. fixture thickness ( t_fix )	50 mm
Min. drill hole depth for through fixings ( h₂ )	115 mm
Min. effect. anchorage depth ( h_ef )	48 mm
Thread ( ø x length )	M8 x 81 mm
Anchor length ( l )	116 mm
Washer (outer diameter x thickness)	16 x 1.6 mm
Width across nut	13 mm
Installation torque ( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528633

ETA-approval
Drill diameter ( d₀ )	10 mm
Max. fixture thickness ( t_fix )	10 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Min. effect. anchorage depth ( h_ef )	50 mm
Thread ( ø x length )	M10 x 46 mm
Anchor length ( l )	84 mm
Washer (outer diameter x thickness)	20 x 2.0 mm
Width across nut	17 mm
Installation torque ( T_inst )	15 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528640

ETA-approval
Drill diameter ( d₀ )	10 mm
Max. fixture thickness ( t_fix )	20 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Min. effect. anchorage depth ( h_ef )	50 mm
Thread ( ø x length )	M10 x 56 mm
Anchor length ( l )	94 mm
Washer (outer diameter x thickness)	20 x 2.0 mm
Width across nut	17 mm
Installation torque ( T_inst )	15 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528657

Bolt anchor FWA Plus

Produktvarianten

Die Vorteile / Produktbeschreibung

Anwendung und Zulassung

Montageanleitung

Dokumente zum Download

ETA-approval
Drill diameter ( d₀ )	12 mm
Max. fixture thickness ( t_fix )	10 mm
Min. drill hole depth for through fixings ( h₂ )	110 mm
Min. effect. anchorage depth ( h_ef )	70 mm
Thread ( ø x length )	M12 x 66 mm
Anchor length ( l )	108 mm
Washer (outer diameter x thickness)	24 x 2.5 mm
Width across nut	19 mm
Installation torque ( T_inst )	35 Nm
Amount	20 pcs
GTIN (EAN-Code)	4048962528695

ETA-approval
Drill diameter ( d₀ )	16 mm
Max. fixture thickness ( t_fix )	25 mm
Min. drill hole depth for through fixings ( h₂ )	145 mm
Min. effect. anchorage depth ( h_ef )	84 mm
Thread ( ø x length )	M16 x 89 mm
Anchor length ( l )	144 mm
Washer (outer diameter x thickness)	30 x 3.0 mm
Width across nut	24 mm
Installation torque ( T_inst )	110 Nm
Amount	10 pcs
GTIN (EAN-Code)	4048962528749