Bolt anchor FAZ II

Advantages

According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time.
The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
The international approvals guarantee maximum safety and the best performance.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

98 pronađeno verzija proizvoda

Verzija

ETA-approval

ICC-approval

Seismic-Approval

Drill diameter

d₀

Legenda = Dopuštenje dostupno — = Dopuštenje nije dostupno

Više rezultata

Pregledano 18 od 98 verzija

0

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete

Also suitable for:

Concrete C12/15
Concrete C80/95 (classification available)
Natural stone with dense structure

* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Dozvola/dopuštenje

ETA-05/0069
DoP No. 0186
Z-21.1-2145
3023222

Za detalje pogledajte odgovarajuće dokumente

Functionality

The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS anchor bolt setting tool.

Dodatni dokumenti

Load Table (PDF, 64 KB)

Odobrenja

Naslov	Tip	Kreirano	Vrijedi do
ETA Certification Document (PDF, 2 MB) European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete	ETA-05/0069	24.4.2020.
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)	DoP No. 0186	15.5.2020.
DIBt, National German Certification (PDF, 171 KB) General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete	Z-21.1-2145	12.7.2022.	12.7.2027.
Factory Mutual (PDF, 747 KB) FM Approval - Certificate of Compliance	3023222

Sastavni dijelovi

Setting tool FABS

Setting tool FABS

Machine-aided installation for a faster installation time

Više informacija

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

Više informacija

Bolt anchor setting tool FA-ST II

Easy and fast installation of bolt anchors

Više informacija

Povezane kategorije

Bolt anchor FAZ II H

For highest demands. Powerful and flexible.

Više informacija

Bolt anchor FAZ II GS with large washer

For highest demands. Powerful and flexible.

Više informacija

Bolt anchor FAZ II HBS

For highest demands. Powerful and flexible.

Više informacija

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	60 [mm]
Anchor length l	65 [mm]
Max. usable length hef,stand./hef,min. t_fix	10 / - [mm]
Thread Ø x length	M6 x 25 [mm]
Width across nut	10 [mm]
Contents	—
Packaging	—
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962298949

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	70 [mm]
Anchor length l	75 [mm]
Max. usable length hef,stand./hef,min. t_fix	20 / - [mm]
Thread Ø x length	M6 x 35 [mm]
Width across nut	10 [mm]
Contents	—
Packaging	—
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962298956

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	65 [mm]
Anchor length l	75 [mm]
Max. usable length hef,stand./hef,min. t_fix	10 / 20 [mm]
Thread Ø x length	M8 x 38 [mm]
Width across nut	13 [mm]
Contents	—
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4006209948712

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	65 [mm]
Anchor length l	75 [mm]
Max. usable length hef,stand./hef,min. t_fix	10 / - [mm]
Thread Ø x length	M8 x 38 [mm]
Width across nut	13 [mm]
Contents	—
Packaging	—
Amount	1 [pcs.]
GTIN (EAN-Code)	4006209405499

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	65 [mm]
Anchor length l	75 [mm]
Max. usable length hef,stand./hef,min. t_fix	10 / - [mm]
Thread Ø x length	M8 x 38 [mm]
Width across nut	13 [mm]
Contents	2 x FAZ 8/10
Packaging	Blister card
Amount	2 [pcs.]
GTIN (EAN-Code)	4006209909195