The expansion plug for metric screws and threaded bolts

Expansion plug M-S

Name: Expansion plug M-S
Brand: fischer

The fischer anchor M-S is an expansion plug made from high-quality nylon for screws and threaded rods with a metric thread. The fischer anchor M-S is ideal for fixing handless, folding shutters or downpipes in concrete, aerated concrete, solid gypsum panels and other solid and hollow building materials. The special anchor can be used in pre-installation and the time-saving push-through installation. When screwing in the screw, the M-S expands and anchors itself in the drill hole. The slimline plug geometry makes it easy to push the plug into the drill hole, for a fast and simple installation.

Varijante proizvoda

Download of image data

Varijante proizvoda

4 Varijanta(e) proizvoda

Drill diameter

Min. drill hole depth

Anchor length

Amount

Packaging

GTIN (EAN-Code)

Pregledano 4 od 4 varijanti

Advantages

The internal geometry of the M-S allows for the use of standard metric screws or threaded rods for the ideal adaptation to suit the intended use.
The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances.
The slimline plug geometry makes it easy to push the plug into the drill hole, for a fast and simple installation.

Applications

Handles
Folding shutters
Trellis
Downpipes
Stand-off installation
Window fittings
Gratings

Building materials

Concrete
Cavity floor slabs made from bricks and concrete
Perforated sand-lime brick
Solid sand-lime brick
Natural stone with dense structure
Solid brick made from lightweight concrete
Solid brick
Solid panel made from gypsum
Vertically perforated brick
Aerated concrete

Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.

Functionality

The M-S is suitable for pre-positioned and push-through installation.
When turning in the screw, the M-S expands in two directions, thus providing a secure anchoring in the building material.
The required screw length is given by: Plug length + plaster and/or insulation layer thickness + fixture thickness + 1 x screw diameter.
Suitable for metric screws and threaded bolts.
Chamfer the thread to make it easier to screw in screws and threaded rods.

Mounting Strip 1 Picture

1 / 5

Komponente sistema

Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	55 mm
Anchor length ( l )	40 mm
Amount	100 pcs.
Packaging	Folding box
GTIN (EAN-Code)	4006209501528

Drill diameter ( d₀ )	10 mm
Min. drill hole depth ( h₁ )	70 mm
Anchor length ( l )	50 mm
Amount	50 pcs.
Packaging	Folding box
GTIN (EAN-Code)	4006209501535

Drill diameter ( d₀ )	14 mm
Min. drill hole depth ( h₁ )	90 mm
Anchor length ( l )	70 mm
Amount	20 pcs.
Packaging	Folding box
GTIN (EAN-Code)	4006209501542

Drill diameter ( d₀ )	16 mm
Min. drill hole depth ( h₁ )	100 mm
Anchor length ( l )	80 mm
Amount	10 pcs.
Packaging	Folding box
GTIN (EAN-Code)	4006209501559

Expansion plug M-S

Varijante proizvoda

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Dokumenti za preuzimanje