Product Category Picture
Application Picture
Application Picture
1   1

Anchor M

The powerful nylon expansion anchor with brass cone for metric threads

The fischer anchor M is an expansion plug made from high-quality nylon with a brass cone for holding a metric thread. The fischer anchor M is primarily suitable for fixing machines, Protective grilles and control boxes in solid building materials. The expansion plug is set in a pre-positioned installation. As the screw or threaded rod is rotated, the internal brass cone expands and the plug anchors itself against the wall of the drill hole. The plug's large external diameter allows a large applied load in the building material. This increases the load-bearing capacity.

Opis proizvoda

  • The anchor's large external diameter helps to achieve a large applied load in the building material. This allows for maximum load-bearing capacity.
  • The anchor's high expansion makes it insensitive to building material tolerances. This guarantees a simple and secure installation.
  • The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility.

Dostupne verzije proizvoda

5 pronađeno verzija proizvoda

5 pronađeno verzija proizvoda

Drill diameter


Min. drill hole depth


Anchor length




Broj artikla 050505

10 [mm]

45 [mm]

35 [mm]


Broj artikla 050506

12 [mm]

50 [mm]

40 [mm]


Broj artikla 050508

16 [mm]

65 [mm]

50 [mm]


Broj artikla 050510

20 [mm]

80 [mm]

60 [mm]


Broj artikla 050512

24 [mm]

90 [mm]

65 [mm]


Pregledano 5 od 5 verzija

Primjena i dozvola

  • Machines
  • Curbs
  • Control boxes
Building materials
  • Concrete
  • Natural stone with dense structure
  • Solid brick
  • Solid sand-lime brick
  • Solid brick made from lightweight concrete
  • Aerated concrete
  • Solid panel made from gypsum
  • Hollow blocks made from lightweight concrete
* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.
Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

  • The M anchor is suitable for pre-positioned installation.
  • Turning in the screw causes the internal brass cone to expand the M anchor, thus reliably anchoring it in the building material.
  • The required screw length is given by anchor length + fixture thickness.
  • Suitable for metric screws and threaded bolts.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Dokumenti za preuzimanje

Dodatni dokumenti

Sastavni dijelovi i povezane kategorije