Br.art. 559872

fischer rail SolarMid 5.50 m Aluminium

Top Features

The SolarMid profile has an increased cross-section to optimize the structure in the case of installations with few roof supporting points and/or particularly heavy forces acting on the structure.
Compatible with PMU/PMCU universal clamps and with PM-F and PM-C pre-assembled clamps.

The SolarMid rail optimizes the number of supports on the roof.

Advantages

Performance: the SolarMid rail has a high load-bearing capacity and is used to reduce the supporting points.
Versatile: the shape of the SolarMid rail allows fixing two modules, positioned horizontally, on a single intermediate rail.
Easy and fast: quick installation in the lower and side grooves with SKS M 8 screws or RHS hammer head screw and in the upper groove with the FCN AL hammer head nut and MW brackets (for crossed joints).
No waste: the optimized length reduces waste and facilitates handling on site.
Maximum allowed centre distance 2500 mm, depending on snow and wind actions calculated according to standards.

fischer SolarMid is an AW 6063 T6 aluminium alloy rail for building structures of photovoltaic systems. The increased 83 mm high cross-section optimizes the number of supports to the roof in case of heavy stress forces acting on the structure. The four side grooves and the lower groove are compatible with SKS M8 screws or RHS hammer head screws and make installation quick and easy. Solar Mid is compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps. The length is designed to optimize profile consumption and reduce waste. SolarMid is indicated for building structures on flat roofs in combination with the triangular frames STFS 10°-13°, STFN 10°-15°, STFN 25 °-30°-35, STFN 200 10°-15°-20° and STN 200 25°-30°-35°. For industrial roofs in reinforced concrete tiles and domes, the Solar-Y system is particularly suitable. For pitched roofs the profile SolarMid can be installed with the hooks GTA 1, GTA 2, GTA 3, GC, GTP, GTPR, GT 130 and GTX 150. For non-removable corrugated panels or barrel/flat tile roof thedouble-threaded screws STSR and STSI can be used and for trapezoidal metal sheets roofs the clamps DLA and DLAK.

Properties

Aluminium alloy AW 6063 T6 according to EN 755-2:2013.

Functionality

Position the support system on the selected support at the distances defined by the project.
Assemble the SolarMid rail on the selected support through the lower groove or side grooves.
To connect two SolarMid rails, install two CPN AL joints on both sides of the rail, making them slide inside the side grooves until it touches the stud in the centre of the joint.
Complete the connection by locking each end of the CPN AL connection with 8 x 3.5 mm x 9.5 mm self-drilling screws on each side of the SolarMid profile.
To limit thermal expansion, it is advisable to create series of rails connected to each other up to a maximum length of 15 m. Beyond this measure it is necessary to interrupt the structure and start again with a new rail disconnected from the previous ones.
Install the clamps through the upper groove of the rail.
Fix the PV panels by tightening the clamps.

Length ( l )	5.500 mm
Weight	1,95 kg/m
Amount	1 pcs.
GTIN (EAN-Code)	8001132102787

fischer rail SolarMid 5.50 m Aluminium

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Tehnički Podaci

Dokumenti za preuzimanje