For quick and easy fixing of PV modules on vertical façades.

PV clip system

The fischer PV clip impresses with its versatility and functioning on diverse anchoring surfaces. Even demanding requirements on the façade are met. Constraints, as encountered with conventional PV clamps, are avoided. The PV modules are securely and mechanically attached thanks to the fischer PV clip. The concealed fixing opens the possibility of realizing comprehensive façade designs.

Produktvarianten

Download of image data

Produktvarianten

5 Produktvarianten

Amount

GTIN (EAN-Code)

Gesehen 5 von 5 Variante(n)

Advantages

The practical sliding nut enables quick and constraint-free installation.
The simple stainless steel plug-in system is highly weather-resistant thanks to the high corrosion protection class III.
Suitable for all types of framed PV modules with mounting holes.
The system enables fixing to various wall substrates and also to different substructures.
The modular system enables the construction of contiguous module arrays with adjustable joint sizes.
The start/end clip can be used both as a start clip and as an end clip, thus minimizing the number of products required.
Pre-applied thread locker on screws.
Integrated potential equalisation.

Properties

Stainless steel with high corrosion protection class III

Functionality

First module:

Slide at least four sliding nuts FSMN II R onto the mounting holes on the back of the module frame.
Apply a drop of threadlocker before screwing in the serrated screws.
Install at least two start/end clips FSMC S/E with one fischer serrated screw each on one side of the module.
Install at least two middle clips FSMC M with one fischer serrated screw each on the opposite side of the module.
Fix the start/end clips FSMC S/E to the building substrate using plugs, wood screws etc..
Fix the middle clips FSMC M to the building substrate using plugs, wood screws etc..

Middle modules:

Slide at least four sliding nuts FSMN II R onto the mounting holes on the back of the module frame.
Apply a drop of threadlocker before screwing in the serrated screws.
Screw the fischer serrated screws into the sliding nuts on one side of the module.
Install at least two middle clips FSMC M with one fischer serrated screw each on the opposite side of the module.
Attach the screws to the previous module using the lock-and-key principle and slide them in.
Fix the middle clips FSMC M to the building substrate using plugs, wood screws etc..

Last module:

Slide at least four sliding nuts FSMN II R onto the mounting holes on the back of the module frame.
Apply a drop of threadlocker before screwing in the serrated screws.
Screw the fischer serrated screws into the sliding nuts on one side of the module.
Install at least two start/end clips FSMC S/E with one fischer serrated screw each on the opposite side of the module.
Attach the screws to the previous module using the lock-and-key principle and slide them in.
Fix the start/end clips FSMC S/E to the building substrate using plugs, wood screws etc..

Mounting Strip 1 Picture

1 / 10

PV clip system

Produktvarianten

Die Vorteile / Produktbeschreibung

Anwendung und Zulassung

Montageanleitung

Dokumente zum Download

Amount	100 pcs
GTIN (EAN-Code)	4048962529067

Amount	100 pcs
GTIN (EAN-Code)	4048962506075