The adjusting undercut anchor made of stainless steel for natural stone or artificial concrete panels.

Zykon panel anchors FZP II SO R/AL

The undercut anchor out of stainless steel for a concealed stand-off installation solution for façade panels out of natural stone or artificial concrete.This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remainig wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses. A completely flat façade surface is created.

Varijante proizvoda

Download of image data

Varijante proizvoda

Odobrenja / Izveštaji o ispitivanju

5 Varijanta(e) proizvoda

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Legenda = Dostupna dozvola— = Dozvola nije dostupna

Pregledano 5 od 5 varijanti

Advantages

Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates an inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

Functionality

The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
The anchor is set through stand-off installation.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Wet diamond drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 6

ETA-approval
Min. panel thickness	20 mm
Embedment depth ( h₁ )	12 - 16 mm
Total length ( l )	30 mm
Installed anchor length ( a )	21 mm
Remaining thread length ( b )	9 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962112559

ETA-approval
Min. panel thickness	20 mm
Embedment depth ( h₁ )	12 - 16 mm
Total length ( l )	33 mm
Installed anchor length ( a )	21 mm
Remaining thread length ( b )	12 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962112566

ETA-approval
Min. panel thickness	30 mm
Embedment depth ( h₁ )	15 - 21 mm
Total length ( l )	38 mm
Installed anchor length ( a )	26 mm
Remaining thread length ( b )	12 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962260984

ETA-approval
Min. panel thickness	30 mm
Embedment depth ( h₁ )	15 - 21 mm
Total length ( l )	43 mm
Installed anchor length ( a )	26 mm
Remaining thread length ( b )	17 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962112573

ETA-approval
Min. panel thickness	30 mm
Embedment depth ( h₁ )	15 - 25 mm
Total length ( l )	43 mm
Installed anchor length ( a )	30 mm
Remaining thread length ( b )	13 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962121193

Zykon panel anchors FZP II SO R/AL

Varijante proizvoda

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Dokumenti za preuzimanje