Zykon panel anchors FZP II T PA

Varijante proizvoda

Odobrenja / Izveštaji o ispitivanju

5 Varijanta(e) proizvoda

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Cylindrical diameter

Undercutdiameter

Colour washer

System

Amount

GTIN (EAN-Code)

Legenda = Dostupna dozvola— = Dozvola nije dostupna

Pregledano 5 od 5 varijanti

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Functionality

Dry drilling in fibre cement.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
Drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
Stress-free and geometrical inter-locking fixing.

Mounting Strip 1 Picture

1 / 4