Product Category Picture
Application Picture
Application Picture
Application Picture
1   1

Internal threaded sockets FIS E

The internal threaded anchor for masonry and aerated concrete

The fischer internal threaded anchor FIS E is a system component for use with the fischer injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green for fixations in masonry made from solid brick, perforated brick, and aerated concrete. When the threaded anchor is installed, the mortar is pressed through the grating structure and creates a form fit with the structure of the brick. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the FIS E is particularly suited to detachable and temporary fixings both inside and outside. The approvals of the various injection mortars must be observed.

Opis proizvoda

Advantages
  • The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
  • The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
  • The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
  • Please refer to the approvals for the mortar used.

Dostupne verzije proizvoda


4 pronađeno verzija proizvoda

4 pronađeno verzija proizvoda

Verzija
ETA-approval
Drill diameter

d0

Thread

M

Packaging
Broj artikla 043631

14 [mm]

M6

Folding box

Broj artikla 043632

14 [mm]

M8

Folding box

Broj artikla 043633

18 [mm]

M10

Folding box

Broj artikla 043634

18 [mm]

M12

Folding box

Legenda = Dopuštenje dostupno = Dopuštenje nije dostupno
Pregledano 4 od 4 verzija
0

Primjena i dozvola

Applications
  • Removable and temporary fixings
  • Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green in masonry and aerated concrete
Building materials
Approved for:
  • Solid sand-lime brick
  • Perforated sand-lime brick
  • Solid brick
  • Solid blocks made from lightweight concrete
  • Vertically perforated brick
  • Hollow blocks made from lightweight concrete
  • Building brick
  • Aerated concrete blocks
Also suitable for:
  • Solid and lightweight concrete blocks
  • Solid pumice and other solid building materials
* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Dozvola/dopuštenje

  • ETA-10/0383
  • ETA-15/0263
Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

Functionality
  • The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW. FIS VL or FIS P can be used but do not have approvals.
  • FIS E is suitable for pre-positioned installation.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Dokumenti za preuzimanje

Dodatni dokumenti

Odobrenja

Naslov Tip Kreirano Vrijedi do
ETA Certification Document (PDF, 21 MB) European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry ETA-10/0383 7.7.2020.
ETA Certification Document (PDF, 7 MB) European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry ETA-15/0263 7.7.2020.

Sastavni dijelovi i povezane kategorije

sc93-delivery-2