Internal-threaded anchor RG M I

The internal threaded anchor for detachable fixations in concrete

The fischer internal threaded anchor RG M I is a system component for use with the fischer resin capsules RSB and RM II and the fischer injection mortars FIS SB, FIS EM Plus, FIS V, FIS VL, and FIS Green for fixations in concrete. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the RG M I is particularly suited for detachable and temporary fixings both inside and outside. The approvals of the various resin capsules and injection mortars must be observed.

Opis proizvoda

Advantages

The internal threaded anchor RG MI is suitable for use with resin capsules or injection mortars in concrete.
The internal threaded anchor RG MI allows for the surface-flush removal and reuse of the fixing point. It therefore offers great flexibility.
The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
Please refer to the approvals of the resin capsules and injection mortar used.

Dostupne verzije proizvoda

12 pronađeno verzija proizvoda

Verzija

ETA-approval

Drill diameter

d₀

Thread

Scale parts mortar

Legenda = Dopuštenje dostupno — = Dopuštenje nije dostupno

Pregledano 12 od 12 verzija

Primjena i dozvola

Applications

Removable and temporary fixings
Anchorings with resin capsules RSB and RM II
Anchorings with injection mortars FIS SB, FIS EM Plus, FIS V, FIS VL, and FIS Green in concrete

Building materials

Concrete, cracked and non-cracked

* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Dozvola/dopuštenje

ETA-12/0258

Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

Functionality

For use in conjunction with resin capsules:

The internal threaded anchor RG M I is set using a hammer drill and the accompanying setting tool in rotating and hitting motions.
During setting, the oblique edge of the internal threaded anchor destroys the capsule, and mixes and activates the mortar.

For use in conjunction with injection mortars:

The RG M I is set manually by lightly rotating it until it reaches the drill hole base.
The mortar bonds the entire surface of the internal threaded anchor with the drill hole wall and seals the drill hole.

Dokumenti za preuzimanje

Odobrenja

Naslov	Tip	Kreirano	Vrijedi do
ETA Certification Document (PDF, 5 MB) European Technical Assessment for fischer Superbond - Bonded anchor for use in concrete	ETA-12/0258	17.6.2020.

Sastavni dijelovi i povezane kategorije

Sastavni dijelovi

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

Više informacija

ETA-approval
Drill diameter d₀	10 [mm]
Thread M	M5
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209482216

ETA-approval
Drill diameter d₀	12 [mm]
Thread M	M6
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209482223

ETA-approval
Drill diameter d₀	14 [mm]
Thread M	M8
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209505526

ETA-approval
Drill diameter d₀	18 [mm]
Thread M	M10
Scale parts mortar	4
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209505533

ETA-approval
Drill diameter d₀	20 [mm]
Thread M	M12
Scale parts mortar	6
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209505625

ETA-approval
Drill diameter d₀	24 [mm]
Thread M	M16
Scale parts mortar	8
Packaging	Folding box
Amount	5 [pcs.]
GTIN (EAN-Code)	4006209505632

ETA-approval
Drill diameter d₀	32 [mm]
Thread M	M20
Scale parts mortar	24
Packaging	Folding box
Amount	5 [pcs.]
GTIN (EAN-Code)	4006209505649