Br.art. 97700

fischer Highbond anchor FHB II-A S M 12 x 120/25 HCR

Top Features

Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required.
Optimised anchor rod for the highest tensile loads.
Optimised for low axial and edge distances in cracked concrete.
No drill hole cleaning is required when using a resin capsule. This saves time.
ETA approval for cracked concrete.

The best performance in cracked concrete for maximum tension loads - even in highly corrosive atmospheres.

Advantages

The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.

The fischer Highbond anchor rod FHB II-A L C is produced from highly corrosion-resistant steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, staircases, façades, and heavy steel constructions are securely installed in highly corrosive atmospheres.

Functionality

The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Napravljeno 14. 12. 2017.

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Napravljeno 19. 01. 2021.

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Važi od 15. 07. 2021.
do 15. 07. 2026.

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Važi od 07. 02. 2017.
do 06. 02. 2027.

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A L

Installation Instructions

pdf,

fischer FHB II

Load Table

pdf,

Highbond-Anchor FHB II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Pribor

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	135 mm
Anchorage depth ( h_ef )	120 mm
Thread ( M )	M12
Width across nut	19 mm
Scale parts mortar	7
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209977002

fischer Highbond anchor FHB II-A S M 12 x 120/25 HCR

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Tehnički Podaci

Dokumenti za preuzimanje