The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry

Injections anchor sleeve FIS H K

Name: Injections anchor sleeve FIS H K
Brand: fischer

The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed.

Varijante proizvoda

Download of image data

Varijante proizvoda

Odobrenja / Izveštaji o ispitivanju

21 Varijanta(e) proizvoda

Drill diameter

Min. drill hole depth

Match

Effect. anchorage depth

Fill quantity per sleeve

Contents

Legenda = Dostupna dozvola— = Dozvola nije dostupna

Više rezultata

Pregledano 18 od 21 varijanti

Advantages

The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock.
The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters.
The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation.
The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation.

Applications

Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green

Building materials

Approved for:

Vertically perforated brick
Hollow blocks made from lightweight concrete
Hollow blocks made from concrete
Perforated sand-lime brick
Solid sand-lime brick
Solid brick

Also suitable for:

Hollow pumice slabs
Slabs made of hollow brick and other perforated brick
Solid pumice and other solid building materials

Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.

Odobrenja

ETA-10/0383
ETA-14/0471
ETA-15/0263
ETA-20/0729
DoP No. 0189
DoP No. 0195
DoP No. 0273
DoP No. 0354

Functionality

The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals.
The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-10/0383

European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry

Napravljeno 07. 07. 2020.

DOP - Declaration of Performance

pdf, DoP No. 0189

Declaration of Performance for fischer injection system FIS V (Metal injection anchors for use in masonry)

Napravljeno 21. 07. 2019.

ETA Certification Document

pdf, ETA-14/0471

European Technical Assessment fischer Injection system FIS GREEN for masonry - Injection system for use in masonry

Napravljeno 03. 02. 2015.

DOP - Declaration of Performance

pdf, DoP No. 0273

Declaration of Performance for fischer Injection system FIS GREEN (Metal injection anchors for use in masonry)

Napravljeno 20. 01. 2021.

ETA Certification Document

pdf, ETA-15/0263

European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry

Napravljeno 07. 07. 2020.

DOP - Declaration of Performance

pdf, DoP No. 0195

Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)

Napravljeno 04. 08. 2020.

ETA Certification Document

pdf, ETA-20/0729

European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry

Napravljeno 31. 10. 2023.

DOP - Declaration of Performance

pdf, DoP No. 0354

Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)

Napravljeno 14. 11. 2023.

Load Table

pdf,

Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A and anchor sleeve FIS H..K - Highest permissible loads for a single anchor in perforated brick masonry for pre-positioned installation.

Komponente sistema

Masonry drill bit Pointer M
5 varijanti

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	60 mm
Match	FIS A M6-M8
Effect. anchorage depth ( h_ef )	50 mm
Fill quantity per sleeve	5 scale units
Contents	—
Amount	50 pcs.
GTIN (EAN-Code)	8001132419007

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	95 mm
Match	FIS A M6-M8
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	10 scale units
Contents	—
Amount	50 pcs.
GTIN (EAN-Code)	8001132419014

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	95 mm
Match	—
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	10 scale units
Contents	4 x FIS H 12 x 85 K
Amount	4 pcs.
GTIN (EAN-Code)	4006209525821

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	95 mm
Match	—
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	10 scale units
Contents	4 x FIS H 12 x 85 K
Amount	4 pcs.
GTIN (EAN-Code)	4048962059335

ETA-approval	—
Drill diameter ( d₀ )	16 mm
Min. drill hole depth ( h₁ )	95 mm
Match	FIS A M8-M10
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	12 scale units
Contents	—
Amount	50 pcs.
GTIN (EAN-Code)	8001132419021

Injections anchor sleeve FIS H K

Varijante proizvoda

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Dokumenti za preuzimanje

ETA-approval
Drill diameter ( d₀ )	20 mm
Min. drill hole depth ( h₁ )	95 mm
Match	FIS A M12-M16, FIS E M10-M12
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	15 scale units
Contents	—
Amount	20 pcs.
GTIN (EAN-Code)	8001132419045